Effects of the new nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) on nitrate and potassium leaching in two soils

In this study, soil column was used to study the new nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) on nitrate (NO3--N) and potassium (K) leaching in the sandy loam soil and clay loam soil. The results showed that DMPP with ammonium sulphate nitrate (ASN) ((NH4)2SO4 and NH4NO3) or urea could reduce NO3--N leaching significantly, whereas ammonium (NH4 -N) leaching increased slightly. In case of total N (NO3--N NH4 -N), losses by leaching during the experimental period (40 d) were 37.93 mg (urea), 31.61 mg (urea DMPP), 108.10 mg (ASN), 60.70 mg (ASN DMPP) in the sandy loam soil, and 30.54 mg (urea), 21.05 mg (urea DMPP), 37.86 mg (ASN), 31. 09 mg (ASN DMPP) in the clay loam soil, respectively. DMPP-amended soil led to the maintenance of relatively high levels of NH4 -N and low levels of NO3--N in soil, and nitrification was slower. DMPP supplementation also resulted in potassium leached less, but the difference was not significant except the treatment ASN and ASN DMPP in the sandy loam soil. Above results indicate that DMPP is a good nitrification inhibitor, the efficiency of DMPP seems better in the sandy loam soil than in the clay loam soil and lasts longer.     

3,5-二甲基吡唑磷酸盐硝化抑制作用初探

采用室内培养实验的方法,以不加抑制剂的尿素作为对照,对比研究DMPP及它的同分异构体3,5-二甲基吡唑磷酸盐作为硝化抑制剂对尿素氮在土壤中转化的影响.结果表明,3,5-二甲基吡唑磷酸盐具有一定的硝化抑制作用.在培养期间,施加3,5-二甲基吡唑磷酸盐的土壤中硝态氮的含量一周后始终低于对照,铵态氮的含量一用后始终高于对照.但在培养试验中后期(三周以后),3,5-二甲基吡唑磷酸盐的硝化抑制效果劣于DMPP.3,5-二甲基吡唑磷酸盐能否作为新型硝化抑制剂,还要对它的生理、生态效应等进行进一步的研究.     

含硫污水系统耐蚀材料的筛选与应用

针对西北地区一综合炼油厂含硫污水管线的严重腐蚀问题，分析了腐蚀原因，确立了材料筛选方案，通过实验室静态挂片试验绘制了重量损失率变化曲线和现场挂片等试验手段，筛选推荐出了树脂玻璃钢耐蚀材料。工业生产应用结果表明，MFE-2型树脂玻璃钢是适用于该厂含硫污水系统的耐蚀材料，为类似装置的长周期运行提供了借鉴和经验。     

循环冷却水复配阻垢缓蚀剂配方的优化

阐述了循环冷却水对金属腐蚀的机理、阻垢缓蚀剂作用的原理,提出了复配缓蚀阻垢剂配方优化的原则及评价标准。并对攀钢煤化公司循环冷却水进行了复配缓蚀阻垢剂配方优化试验,通过配方优化试验,筛选出了DS—605型(浓度为100mg/L)的高效低磷有机膦阻垢缓蚀剂。该配方技术先进,其阻垢缓蚀效果优于GB/50050—95规定的指标要求,冷却水磷含量由原先的12mg/L降至6mg/L,年处理费用降低了27%,具有显著的经济效益和环保效益,目前正准备投入实际使用。     

炼铁高炉净环水高pH碱性运行的阻垢缓蚀研究

以某炼铁高炉妆环水为对象，对循环冷却水高ＰＨ碱性运行阻垢缓蚀进行了研究，筛选出了一复合配方。工业应用试验结果表明，此配方对Ａ３钢的污垢附着速率，腐蚀速率和污垢热阻均低于国家规定的指标要求，说明该配方具有良好的阻垢缓蚀性能。     

仪化热电厂提高循环水浓缩倍率的措施

针对仪化热电厂将循环水用作冲灰水，导致浓缩倍率只有1.6，以及凝汽器铜管腐蚀结垢严重等问题，提出了隔断循环水与冲灰水的直接联系，实现闲路循环，对凝汽器铜管进行酸洗，并对循环水实施加缓蚀阻垢荆、杀菌剂和旁流过滤等办法，全部实施后产生了很好的效益，值得借鉴。     

Occurrence of benzotriazoles (BTRs) in indoor air from Albany,New York,USA, and its implications for inhalation exposure

Despite the widespread use of benzotriazoles as corrosion inhibitors in many household goods, studies on the occurrence of these compounds in indoor air are scarce. In this study, five benzotriazole derivatives were measured in 83 indoor air samples collected from various locations in Albany, New York, USA. Benzotriazoles were found in a majority of the indoor air samples, and the concentrations of their sum in bulk (vapor plus particulate phases) indoor air ranged from below the method limit of quantification to 492 ng·m^?3 (geometric mean: 5.8 ng·m^?3). The highest geometric mean concentration was found in air samples collected in parking garages (155 ng·m^?3), followed by barbershops (13.6), public places (11.5), auto repair shops (5.2), automobiles (4.5), homes (4.5), offices (3.7), and laboratories (2.8). Inhalation exposure to benzotriazoles was calculated on the basis of the measured geometric mean concentrations and air inhalation rate. The highest exposure dose was found for teenagers, with a geometric mean inhalation exposure dose of 79 ng·day^?1. The body-weight normalized exposure dose, however, was the highest for infants, at 3.2 ng·(kg bw)^?1·day^?1.     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.     

工业循环冷却水系统阻垢剂研究进展

本文简介了循环冷却水系统的应用现状和面临的问题．同时论述了冷却水系统结垢的成因和阻垢的机理,并介绍了阻垢剂的发展历程、研究进展及其特点。最后总结概括了未来阻垢剂的发展趋势。     

碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。